Limitor - Temperature limiter

Particularities

Our own plant produces high quality, customized temperature limiters; the functionality of every single switch is multiple tested and thus 100% reliability is guaranteed. The switches are VDE or UL certified.

We offer a wide range of commercial goods for standard solutions.


Area of application

The temperature limiter Q is used wherever, on the one hand, protection against overtemperatures is required, and, on the other hand, automatic cut-in of the device to be protected - subsequent to a follow-on cooling down period - is undesirable or not permissible.


Function

The temperature limiter Q operates independent from any current supply. Temperature detection is effected by means of a bimetal disk which was first dimensioned in accordance with the required cut-off temperature. When this fixed cut-off temperature TA is reached, this bimetal disk will snap over, breaking a contact system and thereby interrupting the electric circuit of the device to be protected. In order to prevent any automatic cut-in of the circuit when the switch cools down again, the switch is equipped with an electric latch/self-holding device.


Self-holding Function

By means of an integrated resistor, heat is generated by the supply voltage after breaking the contact. This heat prevents any decrease in temperature below the value necessary for the cut-in temperature TE. In this way, the switch will keep its contact open, irrespective of its ambient temperature. To close the contacts of the switch, and thus closing the current circuit, will be possible only after disconnection from the power supply.





Products

Product name Product type Short description Performance Temperature range Product page Data sheet
HOT »QBimetallic switchThermal switch with self-holding function. Limitor product. Reflects the highest quality standards.up to 6.5 A40 - 150 °C
HOT »YBimetallic switchLimitor product. Temperature- and current limiter, with self-holding function. Reflects the highest quality standards.up to 6.5 A40 - 150 °C
KO, KS, KB, SOBimetallic switchTemperature Switch Controller/Limiterup to 16.0 A-25 - 200 °C
TK 24Bimetallic switchTemperature detector TK 24 / TK 32up to 16.0 A-45 - 425 °C